NAT的extendable參數，使得一個地址被不同接口NAT出去測試

一.測試拓撲：

二.基本思路和筆試題目：

A.基本思路：

   通過使用NAT extendable參數，使得內部一個地址能在不同接口以不同地址NAT出去，否則內部一個地址只能配靜態NAT一次。

B.筆試題目：

An internal DNS server requires a NAT on a Cisco IOS router that is dual-homed to separate ISPs using distinct CIDR blocks. Which NAT capability is required to allow hosts in each CIDR block to contact the DNS server via one translated address?

答案：NAT extendable

三.基本配置：

A.R1路由器：

interface Ethernet0/0
ip address 202.100.1.2 255.255.255.0

no shut

B.R2路由器：

interface Ethernet0/0
ip address 61.1.1.2 255.255.255.0

no shut

C.R3路由器：

interface Ethernet0/0
ip address 10.1.1.1 255.255.255.0
ip nat inside
no shut
interface Ethernet0/1
ip address 202.100.1.1 255.255.255.0
ip nat outside
no shut
interface Ethernet0/2
ip address 61.128.1.1 255.255.255.0
ip nat outside
no shut

D.R4路由器

interface Ethernet0/0
ip address 10.1.1.2 255.255.255.0
sno shut

ip route 0.0.0.0 0.0.0.0 10.1.1.1

line vty 0 5
password cisco
login

四.NAT extendable配置：

A.R3路由器：

ip nat inside source static 10.1.1.2 61.128.1.8 extendable
ip nat inside source static 10.1.1.2 202.100.1.8 extendable

B.測試：    
R1#telnet 202.100.1.8
Trying 202.100.1.8 ... Open


User Access Verification

Password:
R4>show users
   Line       User       Host(s)              Idle       Location
  0 con 0                idle                 06:08:16  
*130 vty 0                idle                 00:00:00 202.100.1.2

 Interface    User               Mode         Idle     Peer Address

R2#telnet 61.128.1.8
Trying 61.128.1.8 ... Open


User Access Verification

Password:
R4>show users
   Line       User       Host(s)              Idle       Location
  0 con 0                idle                 06:09:06  
130 vty 0                idle                 00:00:49 202.100.1.2
*131 vty 1                idle                 00:00:00 61.128.1.2

 Interface    User               Mode         Idle     Peer Address