Cisco65交換機系列FWSM防火墻模塊登錄密碼重置

FWSM模塊的默認啟動分區是CF：4，維護分區是CF是：1
By default, the FWSM boots from cf:4.

重置FWSM登錄密碼步驟：
1. 以cf:1模式重啟防火墻模塊，進入FWSM維護分區
 # hw-module module mod_num reset cf:1
2. 通過session命令進入FWSM模板
 # session slot mod_num processor 1
3. 登錄FWSM維護分區默認賬戶為root/cisco，進入FWSM維護系統后可以通過clear相關命令來清除重置相關密碼
 # clear passwd cf:4（重置FWSM登錄密碼）
輸出如下格式：
root@localhost.localdomain#clear passwd cf:4
Do you wish to erase the passwords? [yn] y
The following lines will be removed from the configuration:
        enable password 9KPcNpn94rlu8z encrypted
        passwd 0JwOL8MWsnsUL encrypted
Do you want to remove the commands listed above from the configuration? [yn] y
Passwords and aaa commands have been erased.

4. 重置相關密碼后，退出FWSM維護系統，再以cf:4模式重啟防火墻模塊，進入FWSM運行系統
 #hw-module module 4 reset cf:4

5. 待防火墻模塊重啟穩定后，即可以默認賬戶cisco/cisco進入FWSM運行系統
#session slot 4 processor 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.0.41 ... Open
User Access Verification
Password: cisco
Type help or '?' for a list of available commands.
FWSM-HZ> en
Password: cisco
FWSM#

參考地址：
http://sns.clnchina.com.cn/space.php?uid=364772&do=blog&id=4614

歡迎來群166684620一起交流