ansible 批量配置cisco 交換機---接口篇

關于ansible不做介紹。
本例主要通過實例介紹ansible配置ios接口的幾種方法，或者說可利用哪些模塊配置接口。

1 .主機列表，本次測試以1臺主機為例

[root@Ansible-01 ansible]# cat hosts
[cisco]
172.16.254.130 ansible_connection=local 

2.playbooks內容

[root@Ansible-01 interface]# cat interface-phy.yml 
---
- name: interface config 
  hosts: cisco
 # vars: 
 #    creds:
 #         username: "{{ username }}"
 #         password: "{{ password }}"
  gather_facts: no

  tasks:
  - name: action interface G1-2 configure
    ios_config:
       lines:
          - no shutdown
          - switch mode trunk
          - switch trunk allow vlan all
          - do wr
       parents: interface range gigabitEthernet 1/0/1 - 2

  - name: action interface G3 configuration
    ios_l2_interface:
        name: GigabitEthernet1/0/3
        mode: access
        access_vlan: 100 

  - name: action interface G3 configuration
    ios_l2_interface: 
        name: GigabitEthernet1/0/4
        mode: trunk
        native_vlan: 100
        trunk_allowed_vlans: 10-255

  - name: save configuration
    ios_command:
         commands:
             -  wr

3.執行playbooks

[root@Ansible-01 interface]# ansible-playbook interface-phy.yml -u admin  -k 
SSH password: 

PLAY [interface config] **************************************************************************************************************

TASK [action interface G1-2 configure] ***********************************************************************************************
changed: [172.16.254.130]

TASK [action interface G3 configuration] *********************************************************************************************
changed: [172.16.254.130]

TASK [action interface G4 configuration] *********************************************************************************************
changed: [172.16.254.130]

TASK [save configuration] ************************************************************************************************************
ok: [172.16.254.130]

PLAY RECAP ***************************************************************************************************************************
172.16.254.130             : ok=4    changed=3    unreachable=0    failed=0   

4.查看執行效果

interface GigabitEthernet1/0/1
 switchport mode trunk
!
interface GigabitEthernet1/0/2
 switchport mode trunk
!
interface GigabitEthernet1/0/3
 switchport access vlan 100
 switchport mode access
!
interface GigabitEthernet1/0/4
 switchport trunk native vlan 100
 switchport trunk allowed vlan 10-255
 switchport mode trunk
!

5. 可見 ios_config和 ios_l2_interface 兩個模塊都可以操作，只有三層接口則可以使用ios_comfig或者ios_l3_interface模塊。