centos5源碼安裝Nginx、mysql和php的方法

這篇文章主要講解了“centos5源碼安裝Nginx、mysql和php的方法”，文中的講解內容簡單清晰，易于學習與理解，下面請大家跟著小編的思路慢慢深入，一起來研究和學習“centos5源碼安裝Nginx、mysql和php的方法”吧！

我安裝的系統：Centos5

1、下載；

我安裝的下載來自張宴博文下的地址，下載保存的是home下自己目錄的一個文件夾下：

代碼如下:

cd /home/xuxx/software
wget http://blog.s135.com/soft/linux/nginx_php/nginx/nginx-0.7.51.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/php/php-5.2.8.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/phpfpm/php-5.2.8-fpm-0.5.10.diff.gz
wget http://blog.s135.com/soft/linux/nginx_php/mysql/mysql-5.1.33.zip
wget http://blog.s135.com/soft/linux/nginx_php/libiconv/libiconv-1.13.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
wget http://blog.s135.com/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/pcre/pcre-7.8.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.5.3.tar.bz2
wget http://blog.s135.com/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz
wget http://blog.s135.com/soft/linux/nginx_php/imagick/ImageMagick.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/imagick/imagick-2.2.2.tgz

2、準備編譯安裝環境，需要編譯源碼用到gc++
建議如果是新安裝的系統，使用yum upgrade更新下系統。

代碼如下:

sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel
glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel
openldap openldap-devel nss_ldap openldap-clients openldap-servers

注意：這里所有的命令是一行的而不能有換行符，如果是copy的時候，注意要去處該換行符

確保安裝成功！才能正確使用編譯。

3、安裝：

一、安裝PHP 5.2.8（FastCGI模式）
1、編譯安裝PHP 5.2.8所需的支持庫：

1］ libiconv庫

代碼如下:

tar zxvf libiconv-1.13.tar.gz
cd libiconv-1.13/
./configure --prefix=/usr/local
make
make install
make clean
>make distclean
cd ../

make clean 和make distclean都是刪除安裝過程中生成的緩存文件。當然如果你不介意放著也可以跳過這兩步清理操作。

2］libmcrypt庫

代碼如下:

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
make clean
make distclean
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
make clean
make distclean
cd http://www.cnblogs.com/

3] mhash庫

代碼如下:

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

4］mcrypt庫

注意：因為該庫和libmcrypt有依賴性，所以在安裝前必須知道libmcrypt，否則的話會出現：
錯誤

代碼如下:

checking for libmcrypt – version >= 2.5.0…
*** ‘libmcrypt-config –version’ returned 2.4.0, but LIBMCRYPT (2.5.8)
*** was found! If libmcrypt-config was correct, then it is best
*** to remove the old version of LIBMCRYPT. You may also be able to fix the error
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is
*** required on your system.
*** If libmcrypt-config was wrong, set the environment variable LIBMCRYPT_CONFIG
*** to point to the correct copy of libmcrypt-config, and remove the file config.cache
*** before re-running configure
configure: error: *** libmcrypt was not found

是因為path的問題，所以執行：

代碼如下:

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config

然后再安裝：

代碼如下:

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../

二、安裝mysql

代碼如下:

/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql xxx
unzip mysql-5.1.33.zip
cd mysql-5.1.33/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables
--with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=innobase
make
make install
make clean
make distclean
chmod +w /usr/local/webserver/mysql
chown -R xxx:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf.sh /usr/local/webserver/mysql/my.cnf
cd ../

注意：這里編譯./configure命令是一行的而不能有換行符，如果是copy的時候，注意要去處該換行符

在最后一步拷貝的時候，我安裝完在support-files下沒有my-medium.cnf而只有my-medium.cnf.sh所以將這個文件拷貝過去。

＠張宴原文：

附：以下為附加步驟，如果你想在這臺服務器上運行MySQL數據庫，則執行以下兩步。如果你只是希望讓PHP支持MySQL擴展庫，能夠連接其他服務器上的MySQL數據庫，那么，以下兩步無需執行。
　　①、以xxx用戶帳號的身份建立數據表：

代碼如下:

/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=xxx

②、啟動MySQL（最后的&表示在后臺運行）

代碼如下:

/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf &

3、編譯安裝PHP（FastCGI模式）

代碼如下:

tar zxvf php-5.2.8.tar.gz
gzip -cd php-5.2.8-fpm-0.5.10.diff.gz | patch -d php-5.2.8 -p1
cd php-5.2.8/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql
--with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib
--with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem
--enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect
--enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap
--with-ldap-sasl
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../

注意：這里./configure命令是一行的而不能有換行符，如果是copy的時候，注意要去處該換行符

4、編譯安裝PHP5擴展模塊--可選安裝

代碼如下:

tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
make clean
make distclean
cd ../
tar jxvf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
make clean
make distclean
cd ../
tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
make clean
make distclean
cd ../
tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
make clean
make distclean
cd ../
tar zxvf imagick-2.2.2.tgz
cd imagick-2.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
make clean
make distclean
cd ../

5、修改php.ini文件
　　<STRONG>手工修改：</STRONG>查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
　　修改為extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
　　并在此行后增加以下幾行，然后保存：
　　extension = "memcache.so"
　　extension = "pdo_mysql.so"
　　extension = "imagick.so"

　　再查找output_buffering = Off
　　修改為output_buffering = On

6、配置eAccelerator加速PHP：
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini
按shift+g鍵跳到配置文件的最末尾，加上以下配置信息：

代碼如下:

[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="128"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="120"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

修改配置文件：
vi /etc/sysctl.conf
kernel.shmmax = 134217728
然后執行以下命令使配置生效：/sbin/sysctl -p

感謝各位的閱讀，以上就是“centos5源碼安裝Nginx、mysql和php的方法”的內容了，經過本文的學習后，相信大家對centos5源碼安裝Nginx、mysql和php的方法這一問題有了更深刻的體會，具體使用情況還需要大家實踐驗證。這里是億速云，小編將為大家推送更多相關知識點的文章，歡迎關注！