AIX HACMP系統錯誤--NODE同步配置錯誤

AIX HACMP系統錯誤--NODE同步配置錯誤

環境：

操作系統： AIX 5300-08

集群軟件： CRS 10.2.0.1

數據庫：   Oracle 10.2.0.1

故障現象：

   在構建AXI RAC時，從一個node同步hacmp配置到另一個node時，出現以下錯誤：

Verification to be performed on the following:

        Cluster Topology

        Cluster Resources

Verification will automatically correct verification errors.

Retreiving data from available cluster nodes.  This could take a few minutes....

Verifying Cluster Topology...

ERROR: Invalid loopback or localhost address on node: aix215.

ERROR: Invalid loopback or localhost address on node: aix216.

Verifying Cluster Resources...

processing RG: oradata10g

ERROR: The HACMP timestamp file for shared volume group: racvg is inconsistent

with the time stamp in the VGDA for the following nodes: aix215 aix216

Starting Corrective Action: cl_resource_modify_vg_time_stamp.

<01> Setting HACMP timestamp for volume group: racvg to 53df30970aea2ef4 on node: aix215: PASS

<02> Setting HACMP timestamp for volume group: racvg to 53df30970aea2ef4 on node: aix216: PASS

-----------------------------------------------------------------

1 problem(s) were resolved.

Verification exiting with error count: 2

cldare: Failures detected during verification.  Please correct

the errors and retry this command.

Verification has completed normally.

解決方法：

檢查發現，/etc/hosts被修改：

[root@aix215 /]# cat /etc/hosts

127.0.0.1           localhost

192.168.8.215   aix215

192.168.8.216   aix216

192.168.8.209   aix215-vip

192.168.8.210   aix216-vip

10.10.10.215    aix215-priv

10.10.10.216    aix216-priv

更改為：

127.0.0.1               loopback localhost      # loopback (lo0) name/address

192.168.8.215   aix215

192.168.8.216   aix216

192.168.8.209   aix215-vip

192.168.8.210   aix216-vip

10.10.10.215    aix215-priv

10.10.10.216    aix216-priv

@重新同步hacmp，問題解決！