一看就會：超簡單的路由rip協議實驗

一看就會：超簡單RIP路由協議實驗

一.實驗環境

實驗環境：GNS3，C291路由器

二.實驗拓撲圖<img src="C:\Users\mc\AppData\Roaming\Typora\typora-user-images\1571557985394.png" alt="1571557985394" style="zoom:67%;" />

三.實驗步驟

首先我們要分別對R1，R2，R3的端口進行ip設置。設置分別如下圖。<img src="https://cache.yisu.com/upload/information/20200309/33/53627.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53628.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53629.jpg" alt="mark" style="zoom:75%;" />

然后對pc機進行配置，如圖<img src="https://cache.yisu.com/upload/information/20200309/33/53631.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53632.jpg" alt="mark" style="zoom:75%;" />

現在pc機去ping肯定是不通的，接下來我們就要去給路由器配RIP協議。我們先給R1配置。<img src="https://cache.yisu.com/upload/information/20200309/33/53634.jpg" alt="mark" style="zoom:75%;" />

剩下兩個路由器配置方法和R1一樣。<img src="https://cache.yisu.com/upload/information/20200309/33/53635.jpg" alt="mark" style="zoom:75%;" />

<img src="https://cache.yisu.com/upload/information/20200309/33/53636.jpg" alt="mark" style="zoom:75%;" />

目前為止，rip協議配置成功。三臺路由器的直連接口可以相互學習，現在三臺pc機可以互通了。over！